http://www.proacquaaustralia.com.au/ Italiano De

EN

FAQ - ProAcqua Group

 

 


ProAcqua City

- What are the dimensions of a ProAcqua City?
ANSWER: 265 cm height without roof, with roof height 309 cm, width138 cm, depth 98 cm, Roof dimensions 208 cm x 231cm 
- What kind of connections is used?
ANSWER: Load Water with ½-inch hose, Drain (preferable but not essential), Electricity
- How much electricity does a ProAcqua City need?
ANSWER: less than 1,5 Kw  220V
- How often should the filters be changed?
ANSWER: 22.000 lt or 6 month
- What kind of filtration is used by ProAcqua City?
ANSWER: microfiltration up to 0.2 microns, and an Activated Carbon cartridge (both filtrations are optional and not mandatory)
- How much power do the UV lamps need?
ANSWER: 12 watt the inlet lamp and 4 watt the outlet lamp
- What is the weight of a ProAcqua City?
ANSWER: 500 kg
- How often should the UV lamps be changed?
ANSWER: every 6 month
- How much CO2 is used to produce a liter of sparkling water?
ANSWER: about 5 gramms
- How much water does a ProAcqua City provide per day?
ANSWER: about 1500 lt per day


ProAcqua Indoor
- What are the dimensions of a ProAcqua Indoor?
ANSWER:  height 167 cm, width50 cm, depth 62 cm
- What kind of connections is used?
ANSWER: Load Water with ½-inch hose, Drain (preferable but not essential), Electricity
- How much electricity does a ProAcqua Indoor need?
ANSWER: 500 watt
- How often should the filters be changed?
ANSWER: 11.000 lt or 6 month
- What kind of filtration is used by ProAcqua Indoor?
ANSWER: microfiltration up to 0.2 microns, and an Activated Carbon cartridge (both filtrations are optional and not mandatory)
- How much power do the UV lamps need?
ANSWER: 12 watt the inlet lamp and 4 watt the outlet lamp
- What is the weight of a ProAcqua Indoor?
ANSWER: 150 kg
- How often should the UV lamps be changed?
ANSWER: every 12 month
- How much CO2 is used to produce a liter of sparkling water?
ANSWER: about 5 gramms
- How much water does a ProAcqua Indoor provide per day?
ANSWER: about 800 lt per day

ProAcqua HRC
- What are the dimensions of a ProAcqua HRC?
ANSWER: standing model height 150 cm, width 52 cm, depth 51 cm, top model height 51cm width 46 cm and depth 60 cm
- What kind of connections is used?
ANSWER: Load Water with ½-inch hose, Electricity
- How much electricity does a ProAcqua HRC need?
ANSWER: 400 watt
- How often should the filters be changed?
ANSWER: 11.000 lt or 6 month
- What kind of filtration is used by ProAcqua HRC?
ANSWER: microfiltration up to 0.2 microns, and an Activated Carbon cartridge (both filtrations are optional and not mandatory)
- What is the weight of a ProAcqua HRC?
ANSWER: 50 kg
- How much CO2 is used to produce a liter of sparkling water?
ANSWER: about 5 gramms
- How much water does a ProAcqua HRC provide per hour?
ANSWER: 150 lt/h

Prosit
- How can the warranty be activated?
ANSWER: on our web sito on prosit page
- How can I book the service of my Prosit?
ANSWER: write an e-mail to info@proacquagroup.com
- How offen must the service be done?
ANSWER: every 12 months or 6000 lt
- How offen must the service be done?
ANSWER: every 12 months or 6000 lt
- How can I understand when the Prosit have reach the service time?
ANSWER: the uni twill stop and the pressed button will turn the color on red

Under normal conditions the start button pressed  will be illuminated in blue light fixed
Signal luminous: Pressed the button, this  lights up with blue flashing light
Problem: 11 months have elapsed from the first boot or from the last change of filter and theese should be replaced within a month. 
Cause: Pre-filtration Cartridge and activated carbon postfilter have to be changed at least every 12 months.
Solution: Contact the maintenance and book a replacement surgery filters, disinfection and complete check-up of  aging prosit ® system.

Signal luminous: Pressed the start button, it lights up red light flashing
Problem: they have been disbursed 4,000 liters of refined water from the first start or  from the last change of filters and theese should be replaced within the next 1,000 liters.
Cause: Postfilter cartridges and carbon cartridges must be changed at least every 5,000 liters.
Solution: Contact the maintenance and book a replacement surgery filters, disinfection and complete check-up system of aging prosit ®

Signal luminous: Pressed the button, it lights up red light fixed and water is no longer disbursed
They spent 12 months or 5,000 liters have been provided or from the first boot or from the last change of filters and they should be replaced.
Cause: Postfilter cartridges and prefilter carbon Cartridges must be changed at least every 12 months and the carbon Cartridges  every 5,000 liters.
Solution: Contact the maintenance and book the  replacement surgery filters, disinfection and complete check-up system of aging prosit ®

Signal luminous: Both buttons will illuminate red with a flashing Light and water is no longer disbursed
Problem: The water tank is full and  it could tranship
Solution: Empty the water tank to fill and drain the tank where the water is aged.

Signal luminous: Both buttons will illuminate blu with a flashing Light and water is no longer disbursed
Problem: The tank with the water to refine is empty
Solution: Fill the tank loading but first empty the wastewater tank


Seguici su facebook Segui ProAcquaGroup su Twitter